Sanitation Hose

Shields 101-series sanitation hose is kink-resistant and flexible, featuring an EPDM tube, wire reinforcement, and two fabric plies. It resists toilet chemicals, odors, ozone, salt water, and heat. Ideal for toilet-to-holding tank connections, pump-outs, and maximum odor protection.

Sierra's livewell hose is a multipurpose hose with a black, smooth outer cover with vinyl helix. Primarily used for livewell intake and discharge, though it may also be used for bilge pump intake/discharge, drain line, and sanitation intake/vent applications. 1 1/8 in. inside diameter.

Shields Super PVC sanitation hose is smooth on the interior and exterior with an embedded vinyl helix. This hose is typically used for toilets, holding tanks with self-draining lines, or holding tank pump-outs. This product has a minimum bend radius of 5 inches.

Multiflex hose is a multipurpose hose made of clear FDA PVC with an outer black vinyl helix. Ideal for potable water fill, bilge pump discharge, and drain line applications. 1 1/2 in. inside diameter. Sold as 50 continuous ft. 

A multipurpose, full vacuum rated hose made of smooth white FDA grade PVC with imbedded vinyl helix. Ideal for potable water fill, bilge pump intake/discharge, livewell intake, sanitation, and drain line applications. 3/4 in. inside diameter. Price per foot.

A multipurpose, full vacuum rated hose made of smooth white FDA grade PVC with imbedded vinyl helix. Ideal for potable water fill, bilge pump intake/discharge, livewell intake, sanitation, and drain line applications. 5/8 in. inside diameter. 3/4 in. inside diameter. Sold as 50 continuous feet.

FDA formula single layer PVC tubing is primarily used for non-pressurized potable water supply lines and small drain line applications. 5/16 in. inside diameter. Sold as 25 continuous feet.

Softwall hose (no wire reinforcement) is primarily used for short, straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1 in. inside diameter. Sold as a 50 continuous feet.

FDA formula single layer PVC tubing is primarily used for non-pressurized potable water supply lines and small drain line applications. 1/4 in. inside diameter. Sold as 50 continuous feet.

Shieldsflex II wire reinforced hose is primarily used for straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1/2 in. inside diameter. Sold as 50 continuous feet.

Heavy duty heater hose primarily used for engine heater hose, heat exchanger hose, air conditioning circulation lines, and drain lines. 5/8 in. inside diameter. Price per foot.

Softwall hose (no wire reinforcement) is primarily used for short, straight connections in marine wet exhaust and engine water circulation applications.  Designed to resist heat, exhaust gases, ozone, antifreeze and saltwater. 3/4 in. inside diameter. Price per foot.

Bilgeflex hose is a single layer hose made of corrugated polyethylene. Designed specifically for bilge pump discharge applications. Sold as 50 continuous feet.

Bilgeflex hose is a single layer hose made of corrugated polyethylene. Designed specifically for bilge pump discharge applications. Sold as 50 continuous feet.

Polyester reinforced PVC tubing with clear heavy wall FDA grade vinyl. Primarily used for pressurized water system supply lines, drain lines, and washdown pump lines. 1/2 in. inside diameter. Sold as 50 continuous feet.

Shieldsflex II wire reinforced hose is primarily used for straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 5/8 in. inside diameter. Price per foot.

Shields 101-series sanitation hose is kink-resistant and flexible, featuring an EPDM tube, wire reinforcement, and two fabric plies. It resists toilet chemicals, odors, ozone, salt water, and heat. Ideal for toilet-to-holding tank connections, pump-outs, and maximum odor protection.

Heavy duty heater hose primarily used for engine heater hose, heat exchanger hose, air conditioning circulation lines, and drain lines. 3/4 in. inside diameter. Price per foot.

Shieldsflex II wire reinforced hose is primarily used for straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1 in. inside diameter. Price per foot.

Multiflex hose is a multipurpose hose made of clear FDA PVC with an outer black vinyl helix. Ideal for potable water fill, bilge pump discharge, and drain line applications. 3/4 in. inside diameter. Sold as 50 continuous ft. 

Polyester reinforced PVC tubing with clear heavy wall FDA grade vinyl. Primarily used for pressurized water system supply lines, drain lines, and washdown pump lines. 3/4 in. inside diameter. Sold as 10 continuous feet.

Heavy duty heater hose primarily used for engine heater hose, heat exchanger hose, air conditioning circulation lines, and drain lines. 5/8 in. inside diameter. Sold as 50 continuous feet.

Multiflex hose is a multipurpose hose made of clear FDA PVC with an outer black vinyl helix. Ideal for potable water fill, bilge pump discharge, and drain line applications. 1 1/8 in. inside diameter. Sold as 50 continuous ft. 

Multiflex hose is a multipurpose hose made of clear FDA PVC with an outer black vinyl helix. Ideal for potable water fill, bilge pump discharge, and drain line applications. 1 1/8 in. inside diameter. Price is per foot.

Connect this durable polyethylene hose to your bilge pump for fast through-hull discharge and easy setup. Bilgeflex hose is a single layer hose made of corrugated polyethylene. Designed specifically for bilge pump discharge applications. 1-1/8 in. inside diameter. 

Softwall hose (no wire reinforcement) is primarily used for short, straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1 1/4 in. inside diameter. Sold as a 50 continuous feet.

Softwall hose (no wire reinforcement) is primarily used for short, straight connections in marine wet exhaust and engine water circulation applications.  Designed to resist heat, exhaust gases, ozone, antifreeze and saltwater. 1 1/4 in. inside diameter. Price per foot.

Shieldsflex II wire reinforced hose is primarily used for straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1/2 in. inside diameter. Price per foot.

Shieldsflex II wire reinforced hose is primarily used for straight connections in marine wet exhaust and engine water circulation applications. Designed to resist heat, exhaust gases, ozone, antifreeze, and saltwater. 1 1/2 in. inside diameter. Price per foot.