Automatic Bilge Pumps
-
900 GPH Automatic LoPro Bilge Pump, 12V | Rule LP900SRULE-LP900SQty In Stock: 16Brand: Rule Pumps12 volt DC low profile bilge pump is designed with the latest technology to fit tight bilge spaces & accommodate many different bilge pump plumbing configurations. Learn More
800 GPH Rule-Mate Automatic Bilge Pump, 12 volt | Rule RM800BRULE-RM800BQty In Stock: 14Brand: Rule Pumps800 GPH Rule-Mate Automatic Bilge Pump, 12 volt
Learn More
1100 GPH Automatic Bilge Pump, 12 volt | Rule 27SARULE-27SAQty In Stock: 15Brand: Rule Pumps1100 GPH Automatic Bilge Pump, 12 volt
Learn More
Sahara MK2 S800 Automatic Bilge Pump 800 GPH, 12 Volt | Attwood 5508-7ATT-5508-7Qty In Stock: 3Brand: AttwoodAuto Pump 750 Clam
Learn More
800 GPH Rule-Mate Automatic Bilge Pump, 24 volt | Rule RM800B-24RULE-RM800B-24Qty In Stock: 9Brand: Rule Pumps800 GPH Rule-Mate Automatic Bilge Pump, 24 volt
Learn More
500 GPH Rule-Mate Automatic Bilge Pump, 24 volt | Rule RM500B-24RULE-RM500B-24Qty In Stock: 3Brand: Rule Pumps500 GPH Rule-Mate Automatic Bilge Pump, 24 volt
Learn More
600 GPH Ultima Automatic Bilge Pump | Johnson Pump 32-47258-003JP-32-47258-003Qty In Stock: 10Brand: Johnson Pump12 volt Ultima submersible bilge pump with 3/4 in. discharge port features an integrated field effect sensor that automatically activates the pump when water level rises. Learn More
SuperSub 1100 Automatic Bilge Pump 24V | Whale SS1224WHALE-SS1224Qty In Stock: 5Brand: WhaleSuperSub 1100 Auto 24V Learn More
500 GPH Rule-Mate Automatic Bilge Pump, 12 volt | Rule RM500BRULE-RM500BQty In Stock: 16500 GPH Rule-Mate Automatic Bilge Pump, 12 volt
Learn More
2000 GPH Automatic Bilge Pump | Rule 53SRULE-53SQty In Stock: 2Brand: Rule Pumps2000 GPH Automatic Bilge Pump Learn More
2000 GPH Rule-Mate Fully Automated Bilge Pump | Rule RM2000A-24RULE-RM2000A-24Qty In Stock: 2Brand: Rule PumpsRobust 24 volt DC bilge pump with 1 in. & 1 1/8 in. discharge outlets sense when bilge water reaches 2 3/4 in. & automatically turns the pump on to pump water out of the boat. Learn More
Rulemate Automatic Bilge Pumps | Rule RMRULE-RMThe new RuleMate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. The new RuleMate bilge pumps operate using an internal level sensor. When water reaches 2 inches (5cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8 inches (0.9cm), the pump will turn off until the water level rises again. Bilges are not always clean and free from debris. If the level sensor becomes fouled by debris or contaminated water, RuleMate’s unique back up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
Learn More© 2025 Marine Parts Source. All Rights Reserved.